Most repairs done the same day · often within 1 hour

Skip to content

All Apple phones

iPhone Wi-Fi Greyed Out

The Wi-Fi switch in Settings is grey and cannot be turned on, or Wi-Fi keeps switching itself off. Unlike normal connection problems, this almost always means the Wi-Fi hardware inside the iPhone has failed.

  • Occasional issue
  • Depends on diagnosis

Repair at Vision Mobile

  • Usually, depends on diagnosis
  • Depends on diagnosis
  • 3341 Markham Road, Unit 119, Scarborough

Signs & causes

How to recognise it, and why it happens

Common symptoms

  • Wi-Fi switch greyed out and cannot be tapped
  • Wi-Fi turns itself off
  • Bluetooth also does not work or keeps spinning
  • "Wi-Fi Address" shows N/A in Settings › General › About

Possible causes

  1. Wi-Fi / Bluetooth chip fault on the logic board
  2. Cracked solder joints under the chip after a drop or heat
  3. Liquid damage on the board
  4. Software problem (rare)

When it usually happens: After a drop, liquid exposure, overheating, or sometimes after an iOS update on an older iPhone.

Before you bring it in

What you can try first

Try this first

Install the latest iOS, then go to Settings › General › Transfer or Reset iPhone › Reset › Reset Network Settings. Check Settings › General › About: if Wi-Fi Address says N/A after a restart, the fault is in the hardware.

Safe to keep using it?

Yes, usually safe to keep using. The phone works on mobile data while you decide on a repair.

Please avoid

  • Heating the phone with a hair dryer or oven (an old internet tip that can destroy the phone)
  • Erasing the phone hoping it fixes the hardware

Bring it in: When the switch stays grey after an update and a network reset, or Wi-Fi Address shows N/A.

In our store

How we diagnose it

  1. 1Check Wi-Fi Address and Bluetooth in Settings › General › About
  2. 2Reset network settings and update iOS
  3. 3Test Bluetooth to confirm the shared chip is affected
  4. 4Inspect the board for liquid or damage
  5. 5Board-level repair of the Wi-Fi / Bluetooth circuit

The fix

Repair options & prices

Recommended repair

When the Wi-Fi address shows N/A, a board-level repair of the Wi-Fi / Bluetooth circuit is needed. We explain whether it can be repaired and the price before starting.

  • Board-level repair of the Wi-Fi / Bluetooth circuit
Show the technical details

Wi-Fi and Bluetooth share one chip on the logic board. When iOS cannot communicate with that chip, it greys out the Wi-Fi switch and the Wi-Fi address shows as N/A.

A network settings reset or iOS update fixes it only in rare software cases. When the address stays N/A, the chip or its connections on the board need repair.

Parts that can be involved

  • Wi-Fi / Bluetooth chip
  • Logic board

Other repair options

  • Network settings reset and iOS update (helps only in rare software cases)

How we test after the repair

  • Wi-Fi on 2.4 GHz and 5 GHz
  • Bluetooth pairing
  • Wi-Fi Address shown in Settings

Vision Mobile, Scarborough

How we can help

  • Can we repair it?Usually, depends on diagnosis
  • Board-level repairAvailable
  • AvailabilityAvailable in store
  • Diagnosis firstWe check your Apple device and explain the problem and price before any repair.

iPhone repair in Scarborough See all repair prices

FAQ

Questions, answered

Can a software update fix greyed-out Wi-Fi?

Rarely. If the Wi-Fi Address shows N/A, the problem is the hardware on the logic board.

Why did Bluetooth stop working too?

Wi-Fi and Bluetooth share the same chip, so they usually fail together.

Keep reading

Having this problem with your device?

Bring your device to Vision Mobile for professional diagnosis and repair.

Serving Scarborough, Markham, North York and Toronto since 2005.

Vision Mobile 3341 Markham Road, Unit 119 Scarborough, ON M1X 0A5 Phone: (416) 844-1111 Mon–Sat 10 AM–8 PM Sun 11 AM–6 PM Serving since 2005