All Samsung phones
Samsung Stuck on Boot Logo
Your Galaxy shows the Samsung logo and never finishes starting, or restarts again and again. A failed update or full storage is often the cause; a worn battery or a board fault can do the same.
- Common issue we see often
- Depends on diagnosis
Repair at Vision Mobile
- Usually, depends on diagnosis
- Depends on diagnosis
- 3341 Markham Road, Unit 119, Scarborough
Signs & causes
How to recognise it, and why it happens
Common symptoms
- Samsung or Galaxy logo stays on screen
- Phone restarts in a loop
- Phone starts but reboots after a few seconds
- Recovery screen appears by itself
Possible causes
- Interrupted or failed software update
- Storage completely full
- A faulty app (the phone starts in Safe mode)
- Worn battery
- Main board or storage chip fault
When it usually happens: Often during or after a software update, when storage is completely full, after installing an app, or after a drop or liquid exposure.
Before you bring it in
What you can try first
Try this first
Force restart by holding Volume Down and the Side button together for about 10 seconds. If the phone starts, uninstall apps you added just before the problem. Do not choose "Factory reset" in recovery unless your photos are backed up.
Safe to keep using it?
Use with care. A factory reset erases everything. Ask us about data recovery first if your photos are not backed up.
Please avoid
- Factory resetting without a backup
- Installing firmware from unofficial websites
Bring it in: When Safe mode and a restart do not help, or the phone loops after a drop or liquid.
In our store
How we diagnose it
- 1Force restart and try Safe mode
- 2Check whether recovery mode opens
- 3Try a software repair that keeps your data (Smart Switch on a computer)
- 4Test with a known-good battery
- 5Board-level checks
The fix
Repair options & prices
Recommended repair
First we try to repair the software without erasing your data. If that fails, we find the faulty part, or discuss data recovery before any reset.
- Software repair with Smart Switch (keeps your data)
- Battery replacement
- Board-level repair
- Data recovery
Show the technical details
During start-up the phone loads its software and checks the hardware. Damaged software, a full storage chip or a part that does not respond can stop it at the logo or make it restart.
Safe mode starts the phone without downloaded apps, which tells us if an app is the cause. If the phone loops even in recovery, a hardware fault is likely.
Parts that can be involved
- Battery
- Main board and storage chip
Other repair options
- Factory reset (erases data) when you have a backup
- Battery replacement
- Board-level repair
How we test after the repair
- Phone starts normally several times
- No restarts during a stress test
- Calls, Wi-Fi and cameras checked
Vision Mobile, Scarborough
How we can help
- Can we repair it?Usually, depends on diagnosis
- Board-level repairAvailable after assessment
- AvailabilityAvailable in store
- Diagnosis firstWe check your Samsung device and explain the problem and price before any repair.
FAQ
Questions, answered
Will I lose my photos?
Not if a software repair works. A factory reset erases the phone. If your photos are not backed up, ask about data recovery first.
Is a boot loop always software?
No. A worn battery or a board fault can also cause it. We test the hardware before suggesting a reset.
Keep reading
Related device problems
Laptop Randomly Shutting Down
Computer Not Displaying Anything
Having this problem with your device?
Bring your device to Vision Mobile for professional diagnosis and repair.
Serving Scarborough, Markham, North York and Toronto since 2005.
