Desktop Computers
Computer Not Displaying Anything
Your desktop computer turns on (fans spin, lights come on) but the monitor shows nothing or says "No signal". Often it is the monitor cable or input; it can also be memory, the graphics card, the power supply or the motherboard.
- Occasional issue
- Depends on diagnosis
Repair at Vision Mobile
- Usually, depends on diagnosis
- Depends on diagnosis
- 3341 Markham Road, Unit 119, Scarborough
Signs & causes
How to recognise it, and why it happens
Common symptoms
- Fans and lights on, monitor black
- Monitor says "No signal" or goes to sleep
- Computer beeps at start-up
- Screen stays black after the manufacturer logo
- Keyboard lights do not respond
Possible causes
- Monitor on the wrong input, or a loose cable
- Monitor plugged into the motherboard instead of the graphics card
- RAM not seated or faulty
- Graphics card or power supply fault
- Motherboard fault
When it usually happens: After moving the computer, after adding or changing parts, after a power cut, or after a Windows or driver update.
Before you bring it in
What you can try first
Try this first
check that the monitor is on and set to the right input (HDMI, DisplayPort), reseat both ends of the cable, and try another cable. If your computer has a graphics card, plug the monitor into the card's ports (usually lower on the back), not the ones near the USB ports.
Safe to keep using it?
Yes, usually safe to keep using. It is safe to leave off until it is checked.
Please avoid
- Opening the power supply
- Forcing parts into slots
Bring it in: When the monitor works with another device but not with the computer, or it beeps at start-up.
In our store
How we diagnose it
- 1Check monitor power, input and cable
- 2Test the monitor with another device
- 3Check which port the monitor is connected to
- 4Reseat and test RAM
- 5Test the graphics card, power supply and motherboard
The fix
Repair options & prices
Recommended repair
We test the computer step by step and replace the faulty part (RAM, graphics card, power supply) or repair the motherboard, explaining the price first.
- Cable and monitor checks
- RAM, graphics card or power supply replacement
- Motherboard repair
Show the technical details
For a picture, the computer has to start up properly and send a signal through the right port to the monitor. If the computer has a separate graphics card, the monitor must be plugged into that card, not the motherboard ports.
Beeps or lights on the motherboard during start-up are error codes that point to memory, graphics or power problems.
Parts that can be involved
- Monitor and cable
- Graphics card
- RAM
- Power supply
- Motherboard
Other repair options
- New cable or monitor when the computer is fine
How we test after the repair
- Start-up test and long stress test
- Display output on every port
- Memory test
Vision Mobile, Scarborough
How we can help
- Can we repair it?Usually, depends on diagnosis
- Board-level repairAvailable after assessment
- AvailabilityAvailable in store
- Diagnosis firstWe check your device and explain the problem and price before any repair.
Laptop & computer repair in Scarborough See all repair prices
FAQ
Questions, answered
My monitor says "No signal". Is the computer broken?
Not always. Check the input setting, the cable and the port first. If the monitor works with another device, the computer needs testing.
What do the beeps mean?
They are error codes from the motherboard, usually pointing to memory, graphics or power. Tell us the pattern and we can narrow it down.
Having this problem with your device?
Bring your device to Vision Mobile for professional diagnosis and repair.
Serving Scarborough, Markham, North York and Toronto since 2005.
