Windows Laptops
Laptop Charging Port Not Working
Your laptop does not charge, charges only when the plug is held at an angle, or the plug feels loose. The charger, the charging port (DC jack or USB-C) or the battery can be the cause.
- Common issue we see often
- Depends on diagnosis
Repair at Vision Mobile
- Usually, depends on diagnosis
- Depends on diagnosis
- 3341 Markham Road, Unit 119, Scarborough
Signs & causes
How to recognise it, and why it happens
Common symptoms
- Laptop does not charge when plugged in
- Charges only with the plug held at an angle
- Plug feels loose or wobbles in the port
- Charging light flickers
- Windows shows "Plugged in, not charging"
Possible causes
- Faulty charger or cable
- Loose, broken or worn DC jack or USB-C port
- Broken solder joints where the port meets the motherboard
- Worn battery
- Charging circuit fault on the motherboard
When it usually happens: After the cable was pulled or tripped over, after the laptop was moved while plugged in, or as the port wears out.
Before you bring it in
What you can try first
Try this first
Try a different outlet, check the charger's light, and look for cuts or kinks in the cable. If you have a matching charger, test with it. If the plug only works at an angle, stop wiggling it: it can damage the motherboard further.
Safe to keep using it?
Use with care. Avoid wiggling the plug to make it charge; it can break the port and the board.
Please avoid
- Twisting or holding the plug at an angle
- Using chargers with the wrong voltage or wattage
Bring it in: When a known-good charger does not work, or the plug is loose.
In our store
How we diagnose it
- 1Test the charger output and try a known-good charger
- 2Check the port for looseness or damage
- 3Check whether the laptop runs on the charger without the battery (where possible)
- 4Measure the charging circuit on the motherboard
The fix
Repair options & prices
Recommended repair
When the port is loose or damaged, a charging port (DC jack) repair or replacement fixes it. We confirm the charger and battery are fine first.
- DC jack or USB-C port resoldering or replacement
- Charger replacement
- Motherboard charging circuit repair
Show the technical details
Laptops charge through a round DC jack or a USB-C port. On some laptops the port is soldered to the motherboard; on others it sits on a small cable. Pulling or bending the plug can crack the port or its solder joints.
If the charger is fine and the plug is loose or only works at an angle, the port needs repair. If the port is solid, the battery or the charging circuit may be at fault.
Parts that can be involved
- Charger and cable
- DC jack or USB-C port (and its cable)
- Battery
- Charging circuit on the motherboard
Other repair options
- New charger when the charger is the fault
- Battery replacement
- Motherboard repair
How we test after the repair
- Charging with the laptop on and off
- Plug wiggle test
- Battery charging to full
Vision Mobile, Scarborough
How we can help
- Can we repair it?Usually, depends on diagnosis
- Board-level repairAvailable after assessment
- AvailabilityAvailable in store
- Diagnosis firstWe check your device and explain the problem and price before any repair.
Laptop & computer repair in Scarborough See all repair prices
FAQ
Questions, answered
Is it the charger or the laptop?
Try another matching charger. If that works, replace the charger. If not, the port, battery or board needs testing.
Can a loose charging port be fixed?
Yes. Depending on the laptop, the port is resoldered or replaced.
Having this problem with your device?
Bring your device to Vision Mobile for professional diagnosis and repair.
Serving Scarborough, Markham, North York and Toronto since 2005.
