Most repairs done the same day · often within 1 hour

Skip to content

All Apple tablets

iPad Stuck on Apple Logo

Your iPad shows the Apple logo and never finishes starting, restarts again and again, or stays on a black screen. A failed update or full storage is a common cause; battery or logic board faults can do the same.

  • Occasional issue
  • Depends on diagnosis

Repair at Vision Mobile

  • Usually, depends on diagnosis
  • Depends on diagnosis
  • 3341 Markham Road, Unit 119, Scarborough

Signs & causes

How to recognise it, and why it happens

Common symptoms

  • Apple logo stays on screen
  • iPad restarts in a loop
  • Black screen but sounds or notifications are heard
  • Computer shows a restore message when connected

Possible causes

  1. Interrupted or failed iPadOS update
  2. Storage completely full
  3. Worn battery
  4. Logic board or storage fault

When it usually happens: During or after an iPadOS update, when storage is full, or after a drop or liquid exposure.

Before you bring it in

What you can try first

Try this first

Force restart. On iPads with a Home button, hold the Home and top buttons until the Apple logo appears. On iPads without a Home button, press volume up, then volume down, then hold the top button. If it still loops, connect to a computer and choose Update (not Restore).

Safe to keep using it?

Use with care. Restore erases the iPad. Only choose it if you have a backup.

Please avoid

  • Choosing Restore without a backup

Bring it in: When an update from a computer fails, or the loop started after a drop or liquid.

In our store

How we diagnose it

  1. 1Force restart
  2. 2Update in recovery mode from a computer
  3. 3Read restart logs when it starts
  4. 4Test the battery
  5. 5Board-level checks

The fix

Repair options & prices

Recommended repair

First we try an iPadOS update that keeps your data. If that fails, we test the battery and board and explain the repair.

  • iPadOS update or restore with a computer (update keeps your data)
  • Battery replacement
  • Board-level repair
  • Data recovery
Show the technical details

During start-up the iPad loads iPadOS and checks its hardware. Damaged software or a part that does not respond stops it at the logo or makes it restart.

Updating iPadOS from a computer usually repairs the software while keeping your data. If it still loops after a restore, the hardware is at fault.

Parts that can be involved

  • Battery
  • Logic board and storage chip

Other repair options

  • Restore (erases data) when you have a backup
  • Data recovery before a restore

How we test after the repair

  • Starts normally several times
  • No restarts in a stress test
  • Touch, Wi-Fi and cameras checked

Vision Mobile, Scarborough

How we can help

  • Can we repair it?Usually, depends on diagnosis
  • Board-level repairAvailable after assessment
  • AvailabilityAvailable in store
  • Diagnosis firstWe check your Apple device and explain the problem and price before any repair.

iPad & tablet repair in Scarborough See all repair prices

FAQ

Questions, answered

Will I lose my data?

Not if an update fixes it. A restore erases the iPad, so ask about data recovery first if you have no backup.

Is a boot loop always software?

No. A worn battery or a board fault can also cause it.

Keep reading

Having this problem with your device?

Bring your device to Vision Mobile for professional diagnosis and repair.

Serving Scarborough, Markham, North York and Toronto since 2005.

Vision Mobile 3341 Markham Road, Unit 119 Scarborough, ON M1X 0A5 Phone: (416) 844-1111 Mon–Sat 10 AM–8 PM Sun 11 AM–6 PM Serving since 2005