All Apple phones
iPhone Stuck on Apple Logo
Your iPhone shows the Apple logo and never finishes starting, restarts over and over, or stays on a black screen. A failed update is a common cause, but it can also be a battery or logic board fault.
- Common issue we see often
- Depends on diagnosis
Repair at Vision Mobile
- Usually, depends on diagnosis
- Depends on diagnosis
- 3341 Markham Road, Unit 119, Scarborough
Signs & causes
How to recognise it, and why it happens
Common symptoms
- Apple logo appears and stays
- Phone restarts again and again (boot loop)
- Black screen, but the phone vibrates or rings
- Connecting to a computer shows a restore message
Possible causes
- Interrupted or failed iOS update
- Storage completely full
- Worn battery that cannot supply enough power at start-up
- Faulty part connected to the board (charging port, sensors)
- Logic board or storage chip fault
When it usually happens: Often during or after an iOS update, when storage is full, after a drop or liquid exposure, or when the battery is very worn.
Before you bring it in
What you can try first
Try this first
Force restart the phone (press volume up, then volume down, then hold the side button until the Apple logo appears). If it still does not start, connect it to a computer, open Finder or iTunes, and choose Update (not Restore) to keep your data.
Safe to keep using it?
Use with care. Do not choose Restore unless you have a backup: it erases everything on the phone.
Please avoid
- Choosing Restore without a backup
- Repeatedly charging and restarting a phone that got wet
Bring it in: When an update in Finder or iTunes fails, the phone keeps restarting, or the problem started after a drop or liquid exposure.
In our store
How we diagnose it
- 1Force restart and check for signs of life
- 2Connect to a computer and try an update in recovery mode
- 3Read the phone's restart logs (panic logs) when it starts
- 4Test with known-good battery and parts to find the faulty one
- 5Board-level checks for storage or power faults
The fix
Repair options & prices
Recommended repair
First we try to update iOS without erasing your data. If the phone still loops, we find and replace the faulty part, or repair the logic board.
- iOS update or restore with a computer (update keeps your data)
- Part replacement after diagnosis
- Board-level repair
- Data recovery
Show the technical details
When the iPhone starts, it checks its hardware and loads iOS. If the software is damaged, or a part does not answer during this check, the phone stops at the logo or restarts and tries again.
A software problem can usually be fixed by updating or restoring iOS. If the phone keeps looping even after a restore, a hardware fault is likely.
Parts that can be involved
- Battery
- Charging port flex and sensors
- Logic board and storage chip
Other repair options
- Full restore (erases data) when an update does not work and you have a backup
- Data recovery attempt before a restore
How we test after the repair
- Phone starts normally several times
- No restarts during a stress test
- All sensors and buttons checked
Vision Mobile, Scarborough
How we can help
- Can we repair it?Usually, depends on diagnosis
- Board-level repairAvailable after assessment
- AvailabilityAvailable in store
- Diagnosis firstWe check your Apple device and explain the problem and price before any repair.
FAQ
Questions, answered
Will I lose my photos?
Not if an update fixes it. A restore erases the phone. If your photos are not backed up, ask us about data recovery before restoring.
Is a boot loop always a software problem?
No. A worn battery or a faulty part can also make the phone restart. We test the hardware before suggesting a restore.
Keep reading
Related device problems
iPhone Restarting Continuously
MacBook Not Turning On
Having this problem with your device?
Bring your device to Vision Mobile for professional diagnosis and repair.
Serving Scarborough, Markham, North York and Toronto since 2005.
